Salix LXDE edition 13.1 has been released
Re: Salix LXDE edition 13.1 has been released
Try xfburn. I have this problem with 13.1, too. It's also not recognized by thunar. Probably some HAL issue, but I don't know.
Re: Salix LXDE edition 13.1 has been released
Wish to inform that 'Brasero' is running nicely under Salix 3.1 x_86_64. So the problem seems to be LXDE only.
Regards/
Regards/
Re: Salix LXDE edition 13.1 has been released
Another big (!) problem now. Since a live LXDE 3.1 is not yet available I tried two times to do a full install of Salix LXDE edition 13.1 on a usb-stick (/dev/sdc1)?
Installing was successful every time but I can't boot. The problem seems to be lilo.
Anybody can help to get lilo installed on the MBR of that usb-stick?
Thank you.
Installing was successful every time but I can't boot. The problem seems to be lilo.
Anybody can help to get lilo installed on the MBR of that usb-stick?
Thank you.
Re: Salix LXDE edition 13.1 has been released
ikke, install the libburnia suite (libburn, libisofs, libisoburn). Brasero will use that instead of cdrtools if it's present. Maybe your hardware works better with libburnia (which is also what xfburn uses)
Re: Salix LXDE edition 13.1 has been released
Did as you suggested : installed 'libburn' via SlackBuild. But the problem remains. Brasero does not see the empty disk.gapan wrote:ikke, install the libburnia suite (libburn, libisofs, libisoburn). Brasero will use that instead of cdrtools if it's present. Maybe your hardware works better with libburnia (which is also what xfburn uses)
Maybe you are right about the hardware. Brasero (Salix 64 bit) works fine on my laptop. Brasero (Salix LXDE) gives problems on my desktop.
May I come back to maybe a more important question : how to do a full install of Salix LXDE edition 13.1 on a usb-stick?
Thank you.
Re: Salix LXDE edition 13.1 has been released
See this post: http://www.salixos.org/forum/viewtopic.php?f=16&t=999ikke wrote:Did as you suggested : installed 'libburn' via SlackBuild. But the problem remains. Brasero does not see the empty disk.
Maybe you are right about the hardware. Brasero (Salix 64 bit) works fine on my laptop. Brasero (Salix LXDE) gives problems on my desktop.
May I come back to maybe a more important question : how to do a full install of Salix LXDE edition 13.1 on a usb-stick?
Thank you.
Maybe it will help you too.
About installing on a usb stick, I'm not really sure. You definitely need to install as usual first, but you certainly need to tweak LILO for that and maybe take care of other things too. Some hints are provided at that thread, by Shador, Akuna and flux but I don't think anyone tried it yet: http://www.salixos.org/forum/viewtopic.php?f=31&t=944
Re: Salix LXDE edition 13.1 has been released
Thank you for the info and the pointers.gapan wrote: See this post: http://www.salixos.org/forum/viewtopic.php?f=16&t=999
Maybe it will help you too.
About installing on a usb stick, I'm not really sure. You definitely need to install as usual first, but you certainly need to tweak LILO for that and maybe take care of other things too. Some hints are provided at that thread, by Shador, Akuna and flux but I don't think anyone tried it yet: http://www.salixos.org/forum/viewtopic.php?f=31&t=944
Wonder if anybody has ever done a full install of LXDE on a usb-stick. I tried several times. One / two partitions. Lilo / Grub. Without success.
Guess we have to be patient and wait for the LXDE LiveCD. And the install that LiveCD to an usb-stick. But I wanted to show how excellent Salix LXDE is ...
Re: Salix LXDE edition 13.1 has been released
Nothing changes. Problem remains.gapan wrote:ikke, see this: http://www.salixos.org/forum/viewtopic.php?p=6851#p6851
By reinstalling gvfs :
'slapt-get --install gvfs
Reading Package Lists... Done
The following NEW packages will be installed:
bluez gvfs
'
Maybe it is hardware related ...
Thank you for your efforts.
Re: Salix LXDE edition 13.1 has been released
Hi all
Writing from my eeePC 701 4G right now with Salix LXDE 13.1.
SalixOS is installed on SDHC card
Here is uname -a
I had problem with lilo to boot from SD card
I achieve to boot from SD card following this
http://xu3sno.wordpress.com/2009/09/23/ ... c-4g-surf/
Writing from my eeePC 701 4G right now with Salix LXDE 13.1.
SalixOS is installed on SDHC card
Here is uname -a
Code: Select all
splissken[~]$ uname -a
Linux eeesalix 2.6.33.4 #2 Thu May 13 00:27:45 CDT 2010 i686 Intel(R) Celeron(R) M processor 900MHz GenuineIntel GNU/Linux
splissken[~]$
I achieve to boot from SD card following this
http://xu3sno.wordpress.com/2009/09/23/ ... c-4g-surf/