How about adding it to the root (or some other directory) of SalixLive and the SalixLive Desktop.JRD wrote:Newbie will read the HOW_TO...linus72 wrote: Many will atttempt to use Unetbootin to install it to usb
Salix Live 13.0 RC1
Re: Salix Live 13.0 RC1
Re: Salix Live 13.0 RC1
Good idea. I just made it after making the ISO. And it still need to have other languages if possible. But yes, it sounds good to have it on the CD. I just need to get two images for css that are got from the forum.
Re: Salix Live 13.0 RC1
The cups service is disabled by default, but it should be enabled. Also, the pcmcia service is enabled by default, but it should be disabled, it creates huge boot time delays for PCs without a pcmcia card.
This code is used in the standard installation, I suggest you do something similar for the live CD:
This code is used in the standard installation, I suggest you do something similar for the live CD:
Code: Select all
if [ -r etc/rc.d/rc.alsa ]; then
chmod +x etc/rc.d/rc.alsa
fi
if [ -r etc/rc.d/rc.atalk ]; then
chmod -x etc/rc.d/rc.atalk
fi
if [ -r etc/rc.d/rc.bind ]; then
chmod -x etc/rc.d/rc.bind
fi
if [ -r etc/rc.d/rc.bluetooth ]; then
chmod +x etc/rc.d/rc.bluetooth
fi
if [ -r etc/rc.d/rc.cups ]; then
chmod +x etc/rc.d/rc.cups
fi
if [ -r etc/rc.d/rc.dnsmasq ]; then
chmod -x etc/rc.d/rc.dnsmasq
fi
if [ -r etc/rc.d/rc.fuse ]; then
chmod +x etc/rc.d/rc.fuse
fi
if [ -r etc/rc.d/rc.hald ]; then
chmod +x etc/rc.d/rc.hald
fi
if [ -r etc/rc.d/rc.hplip ]; then
chmod -x etc/rc.d/rc.hplip
fi
if [ -r etc/rc.d/rc.httpd ]; then
chmod -x etc/rc.d/rc.httpd
fi
if [ -r etc/rc.d/rc.inetd ]; then
chmod -x etc/rc.d/rc.inetd
fi
if [ -r etc/rc.d/rc.ip_forward ]; then
chmod -x etc/rc.d/rc.ip_forward
fi
if [ -r etc/rc.d/rc.lprng ]; then
chmod -x etc/rc.d/rc.lprng
fi
if [ -r etc/rc.d/rc.messagebus ]; then
chmod +x etc/rc.d/rc.messagebus
fi
if [ -r etc/rc.d/rc.mysqld ]; then
chmod -x etc/rc.d/rc.mysqld
fi
if [ -r etc/rc.d/rc.ntpd ]; then
chmod +x etc/rc.d/rc.ntpd
fi
if [ -r etc/rc.d/rc.pcmcia ]; then
chmod -x etc/rc.d/rc.pcmcia
fi
if [ -r etc/rc.d/rc.rpc ]; then
chmod -x etc/rc.d/rc.rpc
fi
if [ -r etc/rc.d/rc.samba ]; then
chmod -x etc/rc.d/rc.samba
fi
if [ -r etc/rc.d/rc.saslauthd ]; then
chmod -x etc/rc.d/rc.saslauthd
fi
if [ -r etc/rc.d/rc.sendmail ]; then
chmod -x etc/rc.d/rc.sendmail
fi
if [ -r etc/rc.d/rc.serial ]; then
chmod +x etc/rc.d/rc.serial
fi
if [ -r etc/rc.d/rc.snmpd ]; then
chmod -x etc/rc.d/rc.snmpd
fi
if [ -r etc/rc.d/rc.syslog ]; then
chmod +x etc/rc.d/rc.syslog
fi
if [ -r etc/rc.d/rc.sshd ]; then
chmod +x etc/rc.d/rc.sshd
fi
if [ -r etc/rc.d/rc.wicd ]; then
chmod +x etc/rc.d/rc.wicd
fi
if [ -r etc/rc.d/rc.wireless ]; then
chmod +x etc/rc.d/rc.wireless
fi
Re: Salix Live 13.0 RC1
Thank you. Maybe a bad default for the "07-live.lzm" module. I'm glad you found what wasn't good, and it also explains why some people said that the boot time was very very long and some not.
That is why RC are good
I'll check that for tomorrow...
That is why RC are good
I'll check that for tomorrow...
Re: Salix Live 13.0 RC1
are there any news about the final Live Version?
I tested on several PCs, also on x86_64, runs fine. Only some boot time problems as mentioned.
edit: ahhh... RC2
I tested on several PCs, also on x86_64, runs fine. Only some boot time problems as mentioned.
edit: ahhh... RC2
Re: Salix Live 13.0 RC1
hey was wonderin how the kernel-live source works?
do i just install reg 13 kernel source and run make in /usr/src or what do I do to compile salix live kernel?
do i just install reg 13 kernel source and run make in /usr/src or what do I do to compile salix live kernel?
Re: Salix Live 13.0 RC1
All about recompiling kernelive is there : http://enialis.net/~jrd/salix/kernelive ... 6.smp-1cp/
Re: Salix Live 13.0 RC1
JRD
with the link you gave me; do I download and put all that in /usr/src and then where do i start??!
I wanna build live kernel for my 13 setup
so I can make livecd
What steps and how to do it Please?
Thanks
with the link you gave me; do I download and put all that in /usr/src and then where do i start??!
I wanna build live kernel for my 13 setup
so I can make livecd
What steps and how to do it Please?
Thanks
Re: Salix Live 13.0 RC1
OK JRD, Gapan
I tried the kernel build at the link and although all went well it made a kernellive but there was no aufs
folder in /lib/modules/2.6.33-smp and so what happened?
I got no errors and still have the src too, the src in kernel-live/ has aufs folder
but it didnt carry over or I dont know??
How do I get it right?
I tried the kernel build at the link and although all went well it made a kernellive but there was no aufs
folder in /lib/modules/2.6.33-smp and so what happened?
I got no errors and still have the src too, the src in kernel-live/ has aufs folder
but it didnt carry over or I dont know??
How do I get it right?
Re: Salix Live 13.0 RC1
Any news? Or no longer interested? (Akuna back to Africa?)
Will there be an RC2 soon? That week of yours ...
Will there be an RC2 soon? That week of yours ...